Power will be off 9-9:30 today
Schweiss Doors logo

CONTACT US

800-746-8273

Let's Talk
Doors

NOTE ABOUT
HYDRAULIC DOORS
BIFOLD DOORS
DESIGNER DOORS:
PROJECTS

Home

4 to 5 Week Lead Time!
SCHWEISS DESIGNER DOORS

CONTACT US

Hydraulic Hinge
On Steroids

Stand-Alone Doors

Locations

New Strap Latches

What People Are Asking?

53: DEALER INQUIRIES

1

Hi There I am located in Australia and really love the design and concept of Schweiss Doors, I’d love to become an Australia wide dealer if possible. Our commercial door industry is on the move and your doors would now start to suit our needs. I’m hoping to hear from you soon, would be great if we can start a thriving business relation.

2

Good morning, We are supporting and serving schweiss doors. Within our company we have many seasoned techs that are up for the challenge of hangar doors in Connecticut. Im inquiring to see if there is dealership and training available that would run through basic safety and the "what not to do's" please let me know if this is available. Thank you

3

Good evening, I am interested is becoming a part of Schweiss Doors in Colorado. I am Owner/Operator of a welding and fabrication shop. a AWS D1.1 certified welder and fabricator. I'd be interested in talking with someone as to ways I can be part of the team. I also have a 4'x8' plasma table that I'd be able to produce various parts and pieces if needed, to other Fabricator/Installers.

4

Do you have a dealer/agent in South Africa? I am going to start building in a couple of weeks. I have 3 garage doors. One is 3.86 meter high and 4.7 meters wide. Then I have 2 garage doors of 3.86 meters high and 8 meters wide. The place is in the Western Cape called Stilbaai, it has very strong winds and the house is 500 meters from the sea. The garage doors will face the sea. I have done good research and the only product in my opinion I can trust is schweiss doors. I want to have multi fold doors for the 3 garage entry points. I have a concrete building/house. I want to send the architecture plans before a discussion.

5

We are an overhead garage door dealer based in north Idaho. I am interested in expanding into the bi-fold and hydraulic door market.

6

Can you tell me which dealer(s) service your doors in Ohio in my area?

7

Greetings. As an overhead door contractor, I've been asked to supply 5 vertical bi-fold doors for a boathouse project for a valued GC customer. This is not a product type that I've worked with before. Can you provide some guidance on how best approach this opportunity. I've serviced airport bifold doors, but have passed up opportunities to quote/install new units in the past due to a perception that the project scope seemed too large and too risky. Maybe you could put me in touch with a local professional that is already familiar with this market segment? Thanks for your assistance.

8

Hello. I was interested in seeing if there were any opportunities as a west coast fabricator / installer. (I am not sure if you have any other fabrication facilities outside of MN. Could be a benefit for both companies. We are a structural steel fab shop and also have in house detailing abilities for smaller projects. (2-3 detailing people) We utilize Tekla and AutoCad. If someone would like to discuss further, please contact me.

9

Hi we are located in Trinidad and Tobago in the West Indies and very interested in becoming a dealer of your products Regards

10

I am Bidding a project called the Cannery Park Pavilion in Cambridge Maryland. They have specified the use of one of your doors "Power Operated Lift Strap". The door is approx. 36'x12' and has Metal Siding. I wanted to know if you have any Dealers or Installers in the Region that I can get to bid on this work.

11

I am a garage door dealer in the texas panhandle. I am interested in being a dealer and installer.

12

we are interested in knowing more about the SCHWEISS doors and the cost effectiveness of the doors. we are interested in becoming a dealer and installer in Telangana state , India.

13

Do you have any contractors in the Cheyenne Wy area that I can contact about installing rubber door seal on my Bi-fold door? Thanks

14

Would be interested in Dealer opportunities as well as installations for you. I have personally installed your doors and have 20 years in the door industry, with the last 3.5 years owning my own company in Bismarck. Look forward to speaking with you and will be contacting either way as we have a Customer in need of seals for one of their doors. Have a great day!

15

As an owner in a growing sectional door company, I am pursuing the long time fascination in the Schweiss door brand. My business partner has many connections in the agricultural industry such as Becks Hybrids and multiple large local farmers. I personally; have local private airports in mind. We may or may not be fully set up at the moment for installations but we would love to connect in terms of future sales and installations of Schweiss doors. Thank you!

16

I am a Licensed contractor, and we run a few family lumberyards. All the farmers in the area are using these style doors, so I'm interested both personally and to distribute.

17

I am looking for a local distributor of the bifold doors. Long Island, New York. Please email me.

18

Do you have a list of approved installers for Phoenix Arizona area. My client is considering your door for his aviation hanger. However we need a company to install. Please advise. If available I will need you to update proposal. Thank You!

19

Quick Space leases portable storage and portable office solutions. Throughout the years, we have also started to manufacture our own solutions. We are considering taking our manufacturing to the next level and provide products to the whole west coast. Your doors, particularly the bi-fold strap doors, would be a great option for us to be able to provide. We also have some garage and RV garage solution ideas.

20

I need to set up a service call for a large, older hangar door in Albia, Iowa. If you could plese contact me to set up a service call at your earliest convenience then that would be very appreciated! Thank you!

21

Hi I am looking for a supplier in Mexico or USA.

22

I would like to know if you have an installer in the Palm Springs area. Email is the best way to reach me.

23

Looking to be door dealer for Schweiss -El Paso Automated covers West Texas, Permian Basin, Lubbock/Amarillo area and New Mexico, and the Mexico Border.

24

Who are the Schweiss Door Dealers near me? You are welcome to email me. I am actually traveling for the next 2 weeks and on a different time schedule so email is best for now. Thank you

25

I just picked up Lester Buildings and Nucor Steel buildings as well and look forward to building hangars and ag buildings using Schweiss doors.

26

Just installed one of your doors . Great quality would like to be listed as a installer. Or dealer opertunitues. First strap door we ever put in. Very impressed over the old cable design

27

Good morning, I’m interested in becoming your dealer for my area of at least a 100 mile radius. Also while we are on your list for door installers, I have a lead on quite a few doors as I was telling Brent yesterday. What are the perks of being a Schweiss Dealer? I have worked with y'all for years a thoroughly believe in your products. Thank you

28

I’m a metal building contractor and have a customer wanting 2 bifold garage doors . My question is do you sell just the hardware to make the door work on this project so that we can clad it ourselves? I’d also like to learn more about becoming a dealer and installer of your frames and everything

29

I need two each 62' wide x 18' clear opening bifolds for a project in Lewiston, Idaho. These doors are on two adjacent walls around the corner from one another on the hangar. One end wall and one sidewall application. Please quote cost and lead time. We are a Varco Pruden Steel Building dealer and I am interested in becoming a Schweiss Dealer also. I have been involved in the purchase and installation of about a dozen Schweiss doors to date and good familiarity with the product.

30

Would like to take install training for Schweiss Doors on the bifolds and hydraulic doors. Schedule? Cost? How many days? What information can you provide me. I'm available at my cell #.

31

We have a few questions about becoming a dealer for your hydraulic and bifold strap doors. There is no one in our area ordering nor installing this style of doors and we have customers wanting these doors.

32

Hello, looking for closest dealer or possibility of becoming a dealer within the state of Nebraska. Thanks Alan

33

Good Morning. I am from Wickenburg AZ and have seen a lot of Schweiss lift strap bifold and hydraulic doors in the many airparks around here. I have been doing some small steel buildings and leans on hangars and would like to get into providing and servicing the hangar doors. Schweiss was referred to me as a good door company that stands by its products so I thought I'd reach out to you and see if you use dealers and if so do you already have one in this area.

34

We have been fitting doors for 20 years all over Europe I have been asked to do doors 6mts wide x 8 mts high x 3 12 mts wide x 8 mts high x 1 And your system looks very good. Wanted to enquire about these 4 doors and about becoming and agent for your door to cover Ireland and the Uk Thanks again Damian Hope to hear from you soon

35

I sell steel buildings and am interested in becoming a dealer for Schweiss products and doors. I also have a customer interested in a quote on one of your custom-made bifold industrial doors.

36

Good afternoon Dear Ladies and Gentlemen, Our group of companies ASG GROUP plans to become a distributor of your bifold and hydraulic door brand in Turkmenistan. Please put us in touch with a competent person with whom we can start dialogue and negotiations on cooperation. Best Regards Commercial Director of ASG GROUP Eugene KALNITSKY email: emrgruptr@gmail.com email: kalniskiy.e@arassasowdagurlushik.com Tel 993 65 553333

37

I am interested in selling your bifold strap and hydraulic designer doors. Specifically i I need a reliable full view glass door supplier.

38

I am reaching out as Schweiss Doors is exhibiting at booth 629 at the National Business Aviation Association conference next month. I would like to meet with someone attending about business opportunities in North Florida, I believe I could give your business a great push in northern Florida, Alabama and Georgia. Could you please forward this to the appropriate person attending the conference? I am with the Bay Economic Development Alliance (www.bayflorida.org). My phone is (877) 756-9336 and email is becca@bayflorida.org Becca Hardin

39

I would like to find out more about becoming a dealer and installer of Schweiss Designer doors. I've installed your bifold and hydraulic doors in Canada and find them to be the best hangar and residential doors on the market.

40

Please send me local supplier/installer for the one-piece and bifold hydraulic doors. Door in question is in southwest Indiana. Thank you, Ben

41

By way of introduction, I am Mark Schaefer with Nutritional Products International (nutricompany.com). We serve international and domestic manufacturers seeking to gain more distribution within the United States. Your brand at bifold.com recently caught my attention, so I am contacting you to discuss the possibility of expanding your distribution reach by allowing us to be one of your certified dealers and installers of your bifold Liftstrap and hydraulic doors (No cable doors please). We provide expertise in all areas of distribution, and our offerings include the following: * Rapid entry into the U.S. market. * Purchase Orders * FDA Regulatory Compliance * Active accounts with major U.S. distributors and retailers. * Our proven sales force has public relations, branding and marketing all under one roof. We maintain active business relationships with over 200,000 distribution outlets across the nation, and we have a direct line of contact with executive-level buyers. Our company has a proven history of initiating accounts and placing orders with major distribution outlets. Our history allows us to have intimate and unique relationships with key buyers across the United States thus giving your brand a fast track to market in a professional manner. Please contact me directly at 561-544-0719 or by replying, so we can discuss your brand further. Kind Regards, Mark Schaefer Director Of Global Procurement Nutritional Products International nutricompany.com 101 Plaza Real S Boca Raton, FL 33432 Office: 561-544-0719

42

Hello Schweiss Hope this email finds you well? We are currently expanding our supply chain and as a result we would like to start making bifold Liftstrap door purchases from your esteemed firm. We shall provide details of our current requirements for quotation upon your response. Looking forward to establishing a warm business relationship with your firm. Thanks Andrea Socha

43

Good morning! I am trying to learn about quoting bi-fold strap and designer doors to our customers and was hoping that you could help me a bit. I would like to know what information I will need from our customers so I can get them a more accurate estimate? Thank you for all your help! I prefer email or text at (512)783-3556

44

I'm in New Brunswick Canada and am interested in the installation of two designer style bifold garage doors, approx 8'x7'. Do you have any dealers nearby?

45

I would like a list of bifold door dealers and installers in the Nashua NH area. I would like one bifold designer style door for my garage. Also, can you send a ballpark estimate of installed cost for 7X18 garage door.

46

Hello Schweiss, We are a company based just south of Smithville, called Ontario Metal Products, we have been in business for about 5 years. We supply a number of different contractors in the Niagara and Haldimand area with trims, roof and wall steel, trough, soffit/facia, as well as siding. We also are working very closely with our sister company Ontario Outbuilding, we supply them with all there exterior metal needs. We have been looking at expanding our business so that we could perhaps become a dealer of Schweiss Bifold and Hydraulic Garage doors too. While most of our garage doors will be the classic roll up doors, we would love to give our contractors the option of a hydraulic door as well. We would also love to supply these door to our sister company ‘Ontario Outbuilding’, who is already interested in purchasing a couple doors. I heard you guys have a very decent product and we would love to offer that product to our customers too. We are looking at a few companies to possibility go through and trying to find a company that is reasonably priced and has good turn around. We would love to hear back from you to discuss the possibility of us to become a dealer for you guys, but we don’t think that it would makes sense for us install them as well since they are quite different then a regular garage door. Feel free to email us so that would could perhaps set up a call or meeting with you guys to go over some of this stuff. My email is Bruce@ontariometalproducts.com Thanks for your time, Caleb Vermeulen and Bruce Deboer Ontario Metal Products

47

I own a door company in Hickory, NC. I'd like to expand our line of door products to include hydraulic and bifolding liftstrap doors for not-so-typical garage applications, restaurants and more. I look forward to hearing from you and getting more information. Thank you!

48

I have lots of ag customers wanting to save headroom while replacing sliding doors with bifold and hydraulic doors. I’m looking for an opportunity to become a dealer and make my customers happy. Thanks, Travis Myers

49

Looking to become a dealer. I have a client that is looking into upgrading their facility with the Schweiss Bifold door strap conversions. It's over 30 doors in all. I am interested in training and/or schematics/manuals on the upgrade process so I can start the estimate process. I have not looked at anything on the project yet, it's about 3 hours away and would like to have my ducks in a row before I make the trip.

50

Hello, I am a door dealer in Southwest Colorado, and I have a client that wants me to get him a quote on 3-25'x14' Bi-fold designer strap doors. I have never dealt with bi-fold doors personally, but have a friend who has installed alot of them that will probably head off the project if we win the bid. At this point I am just looking for a quote. Thank you, Caleb Forrest

51

I live in Austraia and am interested in representing your bifold and hydraulic Schweiss door products here. Neil

52

we are located in Newbury park California and we sell iron entry doors and Bifold patio doors. would like to work on your products if you don't have any agent here. I'm familiar with and have installed many of your bifold and hydraulic doors.

53

Interested in becoming a dealer and continue education opportunities for install, service and repair for your Schweiss Bifold and hydraulic door models.

54

Hi, My name is Ian Singh, the Sourcing Manager here at Global. Global Industrial Distribution is a National Distributor of industrial supplies. Headquartered in Port Washington, NY with offices in both the US and Canada along with several distribution centers across the US and Canada. In addition to our ecommerce operation, we also have a national sales team that handles commercial markets vertically. We are currently exploring building and related products suppliers to partner with and add value to the category. Thus, we would appreciate the opportunity to evaluate and potentially resell some of the product lines you carry to our customers. What are your thoughts? Advise,

55

I would like to be able to sell and install and possibly sell your products, my business is in Monterrey, N.L and a branch in Cancun, Quintana Roo, my website: powerdoors.com.mx

56

Rice Equipment has been in operation since 1953. We specialize in loading dock equipment, sectional and coiling steel doors, as well as high-speed fabric style doors. Over the years and recently (per the quote request below) we have had requests from builders and architects, for sales and installation services with the hydraulic one piece and vertical lift bi-fold style doors. I would like to discuss our dealership opportunity with Schweiss as well as this proposal request.

57

Hi there, I'm interested in selling and installing your hydraulic and bifold strap doors in Alberta, Canada. We provide industrial, commercial and residential installation and service across Alberta. Do you currently have any dealers in western Canada? Looking forward to some more information, lead times, shipping ect. Thanks

58

We are an installing window and door provider in Colorado and would be interested in learning more about your bifold and hydraulic door products and possibly adding it to the solutions we offer our customers. Thank You

59

We would like to be the Schweiss Door local dealer for the laurel MT area. We service the airport in many ways including electrical and other mechanical needs. Schweiss bifold doors are ideal for airport use.

60

I want to know if you can send the parts to México or if you have any Dealers in México you can put me in touch. The house is concrete

61

We are a specialties contractor in the FL territory. We are interested in representing your specialty door line/vertical fold glass wall and hydraulic one piece commercial, industrial residential and aviation use doors. People around here tell me if a wind rated hurricane proof door is needed, Schweiss is the door company to talk to. Is there an opportunity in the FL territory for the product? Best way to reach me is on my cell or a quick email.

62

Need a quote for a 12’wide 9’tall door to my new metal Building. May be interested in becoming a dealer as well because everyone I talk to who has a Schweiss hydraulic or bifold door tells me the craftsmanship in your doors is second to none.

63

We are in the pre-engineered metal building business in the Texas area, with a full fabrication shop. We have built numerous hangars and have had many requests for your bifold and hydraulic one piece doors. We would like to be a dealer of your doors. Looking forward to hearing from you. Tank you, John Haworth/president

64

We have 45 years in the market of Garage Doors, all of them with Clopay and LiftMaster as a distributor. These smaller door work okay, but when it comes to customer demands for a larger door, a Schweiss door is the best bet. We have a client that wants a quote of a full glass bifold door with liftstraps and a backup system in case of a power outage. Please send me a catalogue. Let me know if you can consider to have us as an distributor for our market, Puerto Rico. Jerry Diaz CEO Lift-Master de Puerto Rico

65

Hi , Durrell Horst from Great Lakes Door Systems . We're looking for a bifold and hydraulic door to add to our lineup of door solutions that we currently offer . We've heard very positive reviews on your Schweiss door systems , and we'd like to do some pricing on some current requests we have right now . We're also very interested in becoming a full fledged dealer , with your info on our website , etc . Thanks in advance ! Sincerely , Durrell Horst

66

Good morning, we would like to know how to become a dealer, we do a lot of commercial work and we have actually installed a few of your Bi-Fold Doors in the past with contractors who purchased your doors and then we would go and install. We are seeing a few more quotes coming our way with customers needing Bi-Fold Liftstrap and Cable-Lift Doors along with some of the other hydraulic doors you have. We would love the opportunity to become a dealer and hopefully help you and Griffin Garage Doors along the way. Thanks

67

Interested in becoming a dealer for Schweiss bifold and hydraulic doors. We sell several hundred overhead doors a year for our primary supplier/installer and this may be an opportunity to bring some of the door business in house.

68

We are looking into different business opportunities. Would like information on your outstanding Schweiss Bifold and hydraulic hangar doors.

69

We'd like the opportunity to start pricing your product against Crown, to see if there can be a partnership started moving forward in the Texas region. We have great relationships with most architects and GC's already, as Hufcor is a global company. We've also been selling and installing bi-fold doors without liftstraps of this nature for 10 years now. However, our new boss is looking for another supplier that can provide bifold liftstrap doors as they are in high demand over cable doors.

70

Good afternoon, I'm Martin Daziano, President of the Tecno Logistica Ltda, a 20 year old company that supplies and install industrial equipment for various clients in Chile/Peru. Mainly we provide Rolling doors, sectional doors, PVC folding doors, docklevelers, among other products. I'm looking for the type of bifold and hydraulic doors you manufacture and would like to learn more about the product and prices. I'm in persona contact with the president of the FAI (Federation Aeronautique Internationale) here in Chile where we intend to replace all the Hangar doors for the airports with the same product to set the same standard and I think there's a good chance to land this. Let me know if you're interested to become a business relationship being Tecno Logistica de only distributor for Schweiss here in Chile/Peru market. Sincerely, MD

71

Hello! My name is Heath Hoofman. I work for Metal Roofing Supply and MFG in Arkansas heading up the building department. We have 12 locations around the state. My boss/business owner is Louis Froud. We sell building kits, and I am looking for new bifold and hydraulic hangar door producer. If you don't mind, I would like to see a number for a 40 wide by 18 high hangar door. I'd like to see a bi-fold with straps and a solid hydraulic door price, for comparison purposes, please. If you don't mind to call when the quote is finished to go over it, that would be spectacular. Thank you in advance, and God bless! Heath Hoofman

72

Interested in becoming a dealer in California. Quote a designer bifold strap door, size is  (1) 16' X 10' (opening size)

73

I am not in the door business now but I want horizontal bi-fold strap garage doors for my home and I think there would be a market for residential as well as commercial - which is why I am interested in being a dealer. Do you sell residential horizontal bi-fold garage doors?

74

I'm the District Sales Manager for American Buildings Company (A Pre-Engineered Metal Building Supplier) located in South Carolina. I often get involved in Design-build work on the front-end when not much is specified or decided about hangar bifold and hydraulic door type/manufacturer, and I'd like to find a local person or a good contact to work with when these opportunities arise. Please give me a call when convenient to discuss. I have one coming up soon.

75

We are looking to add Schweiss bifold and hydraulic overhead doors to our product line. Please reach out to me to disuss. I believe that their are lots of opportunity in this market place for overhead motorized doors We would be looking for a good partner. 25-50 doors per year to start

76

PLEASE PRICE: 8 X 8 FULL VISION GLASS BI-FOLD ANODIZED ALUMINUM BLACK FRAME WITH BLACK LIFTSTRAPS.  WE ARE A COMMERCIAL DOOR COMPANY AND WOULD LIKE TO SELL AND INSTALL MORE OF THESE UNITS. PLEASE LET ME KNOW IF WE COULD BE SET UP AS A DEALER/INSTALLER THANKS, DEAN LIPE

77

We are very interested about dealer opportunity for bifold and hydraulic Schweiss doors in North Africa and South of Europe.

78

I'm currently employed as a senior garage door text/sales rep and have been in the business for over 25 years. I'm always and have been looking for new and innovative products for my clientele regarding commercial and residential applications. My goal is to expand my product line with your bifold and hydraulic style doors for those looking for unique accesses to their homes and businesses, and to reflect personal style. I look forward to any information I can get to implement your product into my designs. Thank you.

79

Hi - we recently acquired a mid-sized overhead door company in Mesa, AZ that has installed Schweiss in the past. We'd like to go harder on the hanger door segment and would be interested in talking about dealer opportunities. Best regards, Gavin

80

Interested in becoming a  bifold and hydraulic Schweiss door dealer. we supply and erect pre-engineered steel and wood buildings. Many of our clients ask for this style of door and it would be a good fit.

81

We're interested in becoming a Schweiss door dealer. We're located in Bartow County in Rydal, GA. Can you get us in touch with your local sales rep?

82

I am currently a sales manager in a overhead door business. Currently bifold cafe doors are increasingly becoming more popular. We substitute for full vision overhead doors and customers are generally happy with that. However, I am interested in possibly becoming a Schweiss Door dealer or adding a division to the company I work with. I am curious on the prices of these doors in comparison with the full vision overhead doors. The market where I do business isn't a market that will spend more than they have to. I would love to offer these types of doors, especially Schweiss Designer doors, if they are within the price of the ones I currently offer. Could you please send me a catalog with general pricing? I would also like some information as to how much the door blocks the top of the opening when open. I hear you lose no headroom with a bifold, how about a hydraulic door? Mainly because as an entrance door i can't have people banging their heads off it. I would need to know how large the opening needs to be so the doors folds up above the required 7' Thank You

83

Hello, I lost the name of your Canadian Schweiss door distributor? We are looking at testing your doors at a prototype restaurant to see if it will work for the rest of the chain. Please advise pricing on 8x9' bifold doors. 

84

Hello, I Have installed your products many times throughout my career and I would like my company to become a dealer as I have always been very proud of my Schweiss Installs and clearly see you have a superior door product! Email is best as I am often with customers Zachary Campbell HIGH-LIFT DOOR INC.

85

Good day! I'm Ajibodu Timothy from Nigeria, I'm into door and interior technology, I don't know if I will be opportunity to be a dealer of your Schweiss bifold door products here in Nigeria. I will be glad if my request is favorably considered Thanks

86

I did get a bid sometime ago for changing out my hangar in Page, Arizona. I cannot find anyone that will come to Page, Arizona and change out to the strap and auto Latch conversion. Do you have anyone that works in this area??

87

I like the look of some of your BiFold doors and was wandering if you had a distributor or bifold door dealer in either New Zealand or Australia. If you can get back to me as soon as possible, that will be appreciated.

88

I am the sales manager of a company about rolling doors and glass doors in Vietnam I would like to cooperate with you to make your Schweiss hydraulic and bifold door products popular in Vietnam Please contact me by email, I need to talk to you to be a salesman in Vietnam

89

I really like the concept, look, and construction of your hydraulic and vertical bi-fold garage doors. We live in Mexico (near Guadalajara) and would like to install a vertical bi-fold door on our garage. Are your products available in Mexico? If so we would like the contact information for the nearest reseller/installer. Thank-you, Doug Schneider

90

I love your Schweiss bifold and hydraulic doors and I'm interested in what you have for dealer or rep opportunities. I'm from Southern California but we also have a home in northern Idaho and we're building a new home in Hayden Lake and plan to spend more time in Idaho where I will need a bifold boathouse door. I didn't see anything on your site about dealers in our area. I know about the project you worked on in Sandpoint at SilverWing. 

91

Over the years we have recommended your product to architects in design as the correct application came along. We have been in the industrial door and hardware business for over 40 years and feel a growing need and see more applications for your products. We would link to have access to your products and build a working relationship. We have well experienced full time installation crews as well. What is the best way to get this going?

92

Looking to sell your products in the Toronto Area. Please let me know if there is a minimum buy. We are currently supplying doors and other commercial services to other car dealerships in the Toronto Area.

93

Gentlemen, I have installed hundreds of your doors in the past years for my former company, but I have recently started my own business and I am interested in becoming a dealer and installing your doors once again. Also I am very interested in switching out the old cable systems for the strap systems which I believe there is a huge market for. I am interested in seeing the prices on your cable system to strap system pricing please? Thank you, Edward

94

I have agriculture customers who have asked me about bifold and hydraulic doors. I'm looking for more information to see if this is a fit to add to our product line. I currently need options and pricing for a 25' x 15' opening.

95

Good evening, I am a shipping container convertor. I am always looking for innovative ways to enhance the functionality of my units. I happened to see your door on a Pinterest post. I would like to know more about your products for use on my conversions and to see whether we could represent you in South Africa.

96

My companies are distributors for commercial construction products such as ceilings and drywall. We do have a commercial door division focusing on hollow metal, steel and wood doors and hardware. We are always looking to broaden our product offering. We have locations in Arkansas, Mississippi and Tennessee which I personally fly to for visits. A number of FBO managers have asked about aircraft hangar doors so, I decided to see if there could be an opportunity.

97

Hello Schweiss Doors, we would like to become an official dealer and installer of Schweiss bi-fold and hydraulic doors in the Florida area. Please contact us if you're interested.

98

We would like to have the opportunity to sell, place and to do the maintenance on all of your products in Europe. In the past we worked together with Schweiss Doors Europe for a project at an Army Base. It was the first Bifold door in Belgium. Kind regards, Luke

99

We are interested in pricing, installation information and possible dealership opportunities of Schweiss Bifold and Hydraulic doors. We are currently a post frame dealer and installer, building 50-70 buildings a year. Thank you, Troy, Builders Representative 

100

We are interested in possibly offering your Schweiss bifold and hydraulic door as an option to our customers. We are mostly a post frame builder but we offer a steel Hybrid Building also. Most of our customers down here prefer the hydraulic door because it offers Thanks Rusty

101

Good day! We have a great interest in the products of your company. To be specific then to the bifold Schweiss strap doors. The climate which prevails in our country is quite diverse . Largely similar to the climate of Canada and the Northern United States of America . And so the tightness created by the bifolding door of your Schweiss production line as well as door design can find better use in our geographical zone. We have a lot of experience with different types of garage doors, doors for hangars, in particular folding doors. But practice and communication with customers shows that the bifold and hydraulic doors of your operations is the most preferred doors worldwide. And if you compare the price of folding gates of large sizes and the hydraulic gates of the same size, the advantage will be for foldable Schweiss door gate and much safer. We had the experience of installing hydraulic gate your production in 2014, The Customer found our organization. And asked "can you install?" And we have established. Interestingly, the installation was quite simple !!! Based on the above ,I want to ask you. So how can there be cooperation . We would like to organize the sale of your equipment in our region. Sales together with installation. Become a dealer of your plant. What do you say about this ? Thank you!

102

I have worked for 20 years as a construction manager for various large Irish firms and am now looking for a new opportunity. I would have many contacts in the structural steel/ construction sector.if you could contact me to discuss I would be most grateful. I am very impressed with the quality of your kinetic architectural type bifold and one-piece kinetic hydraulic doors. .

103

I am a large building builder. I have all necessary equiptment like zoom booms, siccor lifts truck & Trailer to haul. I employee around 10 men at the busy season. We put in around 30 bi folds doors here in Alberta the grain belt of Canada. I would like to maybe a dealer for your door. Please review my web page at demcoconstruction.com maybe we can get together. I like you to notice how strong I make my buildings and I put them on a concrete pile. In my career I've put up approx 330 buildings and my son in law wants to continue the business In the past I've been getting my bi-fold doors from another dealer in Manatoba but your Schweiss doors appear to be better constructed..

104

I own a custom garage door company in Arizona. We install many of the traditional aluminum frame glass garage doors. However we have recently had many inquiries about stacking or bi-fold glass doors. It looks like you guys manufacture a quality bifold door product. Do you wholesale your doors at all? Or are you strictly direct to consumer? I would love to get in touch with someone who could give me some more details about the doors and pricing.

105

Hi Schweiss, I am from China garage door factory. we are interested in your Bi-fold doors. Many customers ask us on hangar door now.How can we to be agent for your bi-fold straplift doors in China Market ? What conditions could be agent for your bi- fold doors ? I hope to get your earlier reply. Thanks advance. Regards Arabella 

106

I'm a sales rep for a steel building dealer in Highland, WI. They have asked me to quote a building with a Schweiss bi-fold door. They sent me the Schweiss quote (33114 MB dated 3/31/2014), but I also need the door loading information and specifications so we can properly design our building. Can someone send me this information in regards to this bid number?

107

Dear Sir, Please can you furnish me in full details about the standard of your products. I will appreciate it more if you can give me with detail specification. I am working as an accredited commission agent and I am looking for supplier whose products is of good quality as your hydraulic doors and bifold straplift door products. These are among the need items which will be purchase in a large quantities. You can reach me for business opportunities for the supply of your products. 

108

I own a garage door manufacturing business in Australia specializing is strong, light, clear door panels perfectly suited to large bi fold doors. We also use solidworks. Would Schweiss Doors be interested in designing for me a solidworks model using my panels to meet my customers particular needs for large commercial, industrial and hangar doors incorporating weldments and Microsoft excel? I'd like to be able to easily quote on different size doors, bifold and hydraulic doors for you to get more door sales here. 

109

I NEED A RESIDENTIAL DOOR QUOTE ON A 60'X 18' WITH STRAPS, WE'VE USED ANOTHER BRAND, BUT WE LIKE THE IDEA OF THE BIFOLD DOOR STRAPS IN LIEU OF CABLES. COULD WE GET SET UP AS A SCHWEISS DOOR DEALER? FOR THE DOOR QUOTE A 42 FT. X 18 FT. ALUMINUM FRAME DOOR. I WOULD NEED FREIGHT CHARGE TO OHIO

110

Hello, I saw the excellent Washington state RV door on your Schweiss website "Photo of the Day" meant to look like a regular door and was wondering about pricing. How much would a same size bifold liftstrap RV garage door like that cost?   

111

I need a quote for an 8x8 hydraulic or bifold strap  seaplane door shipped to Vancouver, BC, Canada. Itemize the door cost break down. Do you have a dealer here that has worked with your product or recommend someone here. 

112

I have a customer looking for a 38' wide x 9'6" high overhead bifold strap float plane hangar door. Please call me with pricing details to include a walk door, remote opener and windows.

113

Please quote a 12'x9' horizontal lifting carriage house door with a exterior door look similar to the overhead door at the Eastman Estate from Garaga. I have been working in the door industry for 20 years, and continue to offer my customers in Quebec, Canada your superb line of  Schweiss hydraulic doors and bifold strap doors. 

114

I would like information about large scale custom made doors. Schweiss bi-folding liftstrap doors. I deal in small scale doors and would like to add the Schweiss door line for some door clients.

115

Do you have reps in Ontario, Canada that will install your bifold hangar doors? We purchased two floatplane hangar doors from your company which will be delivered in May. 

116

Hello, I am needing to get some spec information on a bi-fold strap door for one of my potential customers. The door size he is wanting is 16 1/2 x 40 with windows and a door in the bi-fold door. I need this for my building supplier so they can engineer the structurals to handle the stress this door would put on the building. Thank You Mike

117

I work for a Seattle Construction Company. We are building a residential house and I was wondering if you can give me an estimate for 3 bi-fold liftstrap model garage doors. Each door would be 8' wide and 8'8" high.

118

Dear Sir, we had received your mail, we also a deal with Rolling Shutters, Doors, Gates, Etc., but would like to carry your superior quality bifold and hydraulic doors. Please send the Schweiss Doors catllouges and price list of Doors Hydraulics,an all the things in which you deal Thanking you.

119

We would like to be your sales rep for Taiwan, a small but growing market in Asian Pacific area. We have clients seeking bi-fold type doors for aircraft hangars as well as for industrial building applications. Most doors width requirements are from 3 meters to 12 meters, height from 3 to 10 meters. If you do not have a sales rep, dealers, etc., in this part of the world, please advise. It would be great to hear from your company to establish businesses. Sincerely, 

120

Hello. I helped install 3 Schweiss lift strap bi-fold doors for a client, 4-5 years ago in Fanny Bay, Vancouver Island, BC Canada. I was wondering if I could take a course and look after the maintenance of doors on the West Coast (Canada) for you. The other rep. is on your side of the Rockies, Calgary, Alberta. I have a Certificate of Qualification for Electrician (Red Seal) for installing power to door(s) as well. Please let me know with questions, inquiries,resume,etc... Thanks. Theodore B.

121

My company would like to sale your Schweiss door products and install. Do you have distributors? if so how could my compney get setup.

122

Dear Sir/Madam, Goodd day! I know your company from your company website that you are a professional supplier offer so many kinds doors. I am glad to have the chance to write to you, and sincerely hope to establish business relationship with your esteemed company. And by our joint effort,to open market in your country. First, let me introduce our company and our new products briefly, we are a professional door accessories manufacturer in China for 15 years, mainly produce: 1.sliding door wheel, 2. door hinge(especially adjustable hinge), 3.end stop,door stopper, 4.upper guide roller bracket, 5.cantilever wheel and so on. These product are mainly used for sliding door,swing door and so on. If there is anything I can do for you and your quality Schweiss doors, please contact me directly, it is my great pleasure to help you as I can. Your prompt reply will be highly appreciated. Thank you &Best wishes. Yours sincerely, Ping Chin 

123

Good day, Impressed with your web presence on hanger doors ,we would appreciate if you would be interested to do business with us if mutually acceptable. We have a requirement for hanger doors and we think you could possibly be able to quote to us on the same. To know more about us, please visit our website. We are a leading company based in United Arab Emirates in all types of doors and have a large number of prestigious installations to our credit representing different brands. Our immediate requirement is for an ongoing project, which I think could possibly be converted the hydraulic system door manufactured by you. I would appreciate more technical specs, load conditions and other specifics to be able to present to our client to suggest such a conversion from a regular sliding hanger door to a bifold or hydraulic door. The hanger doors we are looking at are quite large. Jamal R.

124

We wanted to know if you are interested in bringing your Schweiss door products to India and if you are looking at a partner for the same.

125

I was wondering if you guys were looking for any more installers or installation crews I have 23 years in the door business. I have experience in all phases of installation, mechanical, electrical. You name it I've done it. A foreman for over 15 years running 10 man crews. Flying all over the country installing from standard tip ups, aperture sliders, bi-folds, explosion proof, crane rail set ups. vertical lift panel lifts, high speed fabric doors, monster rolling steel doors with 10in slats, sound proof bi-folds, cantilever style doors with removable mullions. Countless retrofits for tail doors for the the new C-130. If at all interested or just want to talk drop me a line. Thanks Martin Gardner

126

HI MY NAME IS RICK, WE ARE A HANGAR DOOR INSTALLATION AND REPAIR CO.WE ARE VERY FAMILAR WITH YOUR DOORS SYSTEMS.I WAS WONDERING IF YOU ARE LOOKING FOR ANY DOOR INSTALLERS?

127

I was just wondering if there would happen to be any job openings in your business at this time. I will be graduating in may of 09 from Ridgewater Hutchinson with a degree in welding and am looking fora job in that field. Thank you for your time in reading this e-mail an I hope to hear from you either way if there would be a job opening or not Thanks Justin

128

Hey Mike- We will be trying to contact you personally soon, but just wanted to ask you to keep us in mind for any employee or customer lunches, meetings etc. We are open for lunch Monday, Friday and Sunday and every night. We are flexible to meet your needs and offer pizza as well as pasta, piegas and salads! Look forward to talking with you soon! Scott and Sara W.

129

interested in welding job. I worked at accurpress Inc. for 14 years as a welder. Wondering what pay is and hours worked are.

130

I use to live in Minnesota and would always see your display at the Minnesota State fair. Since moving back to my native state of OR, I was suprised to see your doors specified in a project out in Eugene, OR. So the reason for this e-mail is to find out how you will be bidding this project for UofO Chilled Water Plant? I was wondering if you will be just supplier, or supply and install doors? If you are looking for installers for this project, I would be interested. I do have some experience with bifold. I would even be willing to come to your location and receive training if that is necessary.

131

I am interested in employment opportunites within Schweiss. I have 6 years commercial door sales experience as a factory representative as well as an independent sales representative serving commercial door dealers and installers, material handling dealers and distributors, and end users alike. Your products are very intriguing to me as I recognize the unique strap system you utilize. Please contact me if you have any salesperson needs within the territories of the upper Mid-west. Thank you, Chris T.

132

This is my curriculum vitae Wagner L. E. Born in 02/march/1983 In Curitiba city %u2013 Paran%uFFFD %u2013 Brazil. Metalworker professional since he is 15 years old, 10 years ago. Working with iron's windows, iron and steel's doors for residence (including garages) or commercial places. Gates (normal in iron or automated). Fences in iron. Purpose: make my best, being a hard work person. have better profits with my job to invest in Brazil. have an experience living in another country, knowing the language and the culture. Build my own workshop of a metalworker in my city. I'm expert in every work like metalworker and I use to lead my team, making big services. Example: buildings and residential assemblage. I'm also ending a course to solder structures in SESI ( Industrial Governmental Courses in Brazil).

133

We are a Flatbed, Step Deck & Heavy Haul provider with great rates! Our coverage areas are Continental U.S., Alaska, Canada. Please call or email us for a quote on your next loads. Best regards, Bob W.

134

Have a bucket truck / welding truck. Would like to custom build side doors to act as shade while welding, then cover tool box doors, when closed , to deter theft. Truck sits outside. Interested in hydraulic cylinders,systems,etc., and if you decide to offer this system to the open market as a custom design and make millions, a cut of the profits would be appreciated, since it was my idea. Already got shafted on another product invention in Pittsburgh, then bought it two years later. Thank you

135

Hi! I'm Carlos, Portuguese, I ask if you seel your products to Europe and Africa, and, if is possible to get your representation to seel your products? If yes what are your conditions? I wait four you, Best Regards and Success! Carlos

136

We are into manufacturing of designer gates in uganda, using onametal(casted) design, we have seen your products and would like to introduce your products in uganda. Please assist us , and tell how we can venture . You can also visit our web site to see our product range.

137

i am an aircraft mechanical engineer with experiance 16 yrs. in a&p maintenance(airframe and power plant)maintenance(transport aircrafts)With lisence issued by(THE STATE ORGANIZATION FOR IRQI CIVIL AVIATION) specialest in (turbofan/piston engines) i am also flight engineer on aircraft type(IL-76MD)WITH LISENCE ISSUED BY (THE STATE ORGANIZATIN FOR IRQI CIVIL AVIATION) ALSO I AM A MAINTENANCE ENGINEER FOR LIGHT AIRCRAFTS (WARRIOR/SENECA /SESENA /PRAVO)(A&P) SEEKING FOR JOB IN ANY AIRCRAFTS MAINTENANCE COMPANY IN ANY LOCATON

138

basically i am a electronics engineer . i am intrested to doing work in your compay. in electronics related job. thanks

139

name is Tracy. Im 40 and after being in Rx retail for 15 yrs. I want to take my people and customer service skills to use. I have been working for vending company helping place machines in which I've been successful. But vending machines only get placed when it is brought to the owners attention and makes them unhappy we/current vendor. with all the faxes-mails, cold calls and walk ins I've done they just have to wait. the companies name is out there I did my job time to move on. I am inquiring about that sort of job you may need in my area and I want to work as a subcontractor. Meaning I work independently for you representing your company and services place to place asking to put my sticker on their door in case it needs repair. I can do all fax e-mail calls, as I have HOME OFFICE. I don't request benefits being you may only want my rep.services for 3 months which should be enough time to get your name out and get a lot of doors stickered. I won't do commission unless its draw commission because you won't see returns until a door breaks. I won't come after you for unemployment or be upset if you don't need me after 3 months. I had a job coach this summer he said rep. or account exec. in the field. im great with people fun friendly but always in a professional manor. This is how I will represent your company. I can dress up or down depending on targets. I have my own car and I must say everyone says this is what I should do. Why? because I do all the things owners don't want to. my friends say I should sale cars but the dealers want you to know or train you which is nice but I would rather be out or in contact with new people. I live in El Sob ante ca which is san Francisco east bay area Ca. I am available for east bay and north bay. I work approximate 32 hrs a week but when I represent someone I do it every where I go. ( this is the lowest according to labor statistics and enough to be happy) That is why I only charge 32hrs. My pay is sort of negotiable but this is more than fair for your company to get name out and to represented professionally. $430 per week check or cash I do my own taxes so 1099 is up to you. An extra $20 to make $450 per week this will make sure I have gas AND bridge fair if needed. if you want reciepts for your taxes I can do $400 but you pay for milege bridge and all necessities, (if 1099 it would be $450 wk) I just want to do something im good at and take care of my kid, by helping someone grow I grow too. I hope to own my own business someday but $ comes first. job is what I need. short term I worked lyres for someone else now I want to do MY work FOR someone else. .I can do this to help anyone build their business so if you know someone who needs someone like me, please refer me to them. I really appreciate your time and sincerely hope you will get back to me. Thank You SINCERELY, Tracy

140

Please forward to the HR Manager.... I am inquiring about a possible opening for a drafter at your company and would like to apply. Are you hiring and if so, would you accept my resume and correspondence to apply by email? Looking forward to hearing from you, Best Regards, Suzette B.

141

We are a door company in the Las Vegas, NV area and were looking into getting into the hangar door installation and maintenance business. We would love to be placed on your list of vendors for the Las Vegas area. Also, we would love to have the ability to use your product in any projects that may present themselves here. Thank You very much and we look forward to working with you in the future.

142

We are interested to be your agent in the golf area if you do not have an agent. Please replay by e-mail a.s.a.p. Abdulaziz Gen.Manager.

143

My Name is Paul M. and I was looking at your web-site.. I see that you are using a Gas Spring for the hydraulic lift of the doors... I am a Gas spring manufacturer and we make all kind of gas struts and hydraulics.. We are very competitive and we can manufacturer any size or lbs of gas spring. Our European engineering is FREE and we will provide your company with FREE samples.. Please give me a call and I would enjoy speaking with you. We are a very talented company and we make all kind of springs. We also make what is called a traction spring which does the opposite of a gas spring. It pulls the rod into the cylinder instead of pushing it out. We also make friction springs and lockable springs... Thank You Paul M. Vice President

144

dear sir i am warking 7 years for roller door company in sri lanka i would like to wark for u pls let me know if u have any oppatunaty thnks

145

I visited your stand at the Air Venture in Oshkosh, took some pictures and talk to Mike Schweiss. We would like to represent your company in Chile. We actually work in mining, forestry. celulose, construction, I'm sure that we can do an excellent job selling this bi-fold doors. Wishing to hear from you soon, receive our best personal regards. Marcelo General Manager Sermagrep S.A.

146

dear sir thank you firesr for your intresting to read my massage i would like to inform you i have good experiance in overhauling and maintaining for all hydraulic air craft jacks and i have diploma in same postion hydraulic technician from egypt institute from 1993 and i hope to find in your company any vacent in same postion thankx and i hope to hear from you as well best regards technician yasser

147

Dear Sir or Madam, Our compny------Qingdao Yida rubber co.,ltd, is a lead rubber product manufacturer and exporter in China, specializing in manufacturing the following products: 1. Extruded Rubber Product: Rubber Seal, Rubber O-Ring, Rubber Gasket ect,. 2. Rubber Mat: EVA Mat for sport & Rubber Mat for animals 3. Rubber Sheet: NR,CR,EPDM,NBR,SBR,Silicon Rubber 4.Rubber Hose,Rubber Tube 5. Skritting Rubber All the product can made accord to the customer's requirements. If you are interested in any of the above items, pls feel free to contact me! Kind regards! Sales Manager Tom

148

We are XIAMEN TAILISHIN IMP&EXP CO.,LTD. As lead company at local area, we have more than ten years experiences in selling pvc sheet for door and furniture, window. and also we have rich experiences at after service. Our product has very good quality and made by import materials (not made by waste plastic materials) and world lead craft, that's why our product has very good quality reason. Now we have full honor to establish cooperate relation ship with your company. Our pvc sheet surface can make like the oak, rose wood, cherry, black, and colors. We have more than one thousand color and grains. Every standard of the product accords with standard EN71, RoSH demand in Europe. Our product specification is: Thickness:0.1mm-0.5mm width:980mm-1400mm If you have any interesting in our product. Please don't hesitate contact us Looking forwards for your reply best wishes and regards Yours sincerely roger

149

Dear Sir, I just want to confirm if the company planning to step in indian market ,as it is the place in present time where all major international brands are entering. I am working in this industry from 10 years having good exposure in North india and have the capability to launch any product relating to constructio. Waiting for yopur reply ,if the company give me an opportunity to work with .Presently working as Hardware Consultant in HafeleIndia. Regards, Yashwant

150

are you represented in Africa if not i would like to look at the opportunity of becoming an agent for South Africa.

151

I would like to hear from you if you would like to make me one of your team members. I would also like to work for you overtime and expand my career skills and keep on practicing on dimensioning project with you. You can also get my help to traslate spanish to english in times of need. I just need to have one chance to try out and I will try to be the best and over check my work.

152

Dear Sirs, We have taken your name and address from Taiwan Trade Directory made to understand that your biggest Manufacturer and exporter in your country. We take to introducing our selves to you that Our company is well established import and export company in Bangladesh. Also, we are very interested to import and marketing with sales and control your products Bangladesh market whole area as a Sole-Agent basis . Please send catalogues with quote most competitive price by EMS or any sprite postal service for our selection and market evaluation. Upon receive your competitive prices we will place the order as early as possible. We are export Stainless Steel Scraps from Bangladesh . If you want to interested import Stainless Steel Scraps please contract us without hesitation. We shall be highly appreciated your early reply. Thanking you and looking forward to your favorable response by return mail. Lot of thanks & Best Regards